Antminer S19j Pro Profitability — Bitcoin Mining
104 TH/s at 3,068 W (approx. manufacturer spec) · 29.5 J/TH · subsidy-only math against live network hashrate
--
--
loading live data…
Hashrate
104 TH/s
approx. spec — see table
Wall power
3,068 W
at the wall, approx. spec
Efficiency
29.5 J/TH
energy per unit of hash — lower is better
Algorithm
SHA-256
Bitcoin
Bitcoin hashprice
--
USD per TH/s per day, subsidy only
Revenue at spec
--
USD/day, before pool fee & power
Break-even electricity
--
$/kWh where this rig stops paying
Network hashrate
--
BTC, live
Antminer S19j Pro Calculator
check your bill — US residential average is ≈$0.16; hosted rates often $0.06–0.08
Revenue
--
USD per day, subsidy only
Electricity
--
USD per day at your rate
Profit / day
--
revenue minus electricity
Profit / 30 days
--
at today's numbers
Break-even electricity
--
$/kWh where profit crosses zero
Power cost share
electricity as % of revenue — past 100% the machine is a heater
Sats stacked / day
--
what your pool balance grows by, price aside
Efficiency at your inputs
--
J/TH from the hashrate and watts in play
Payback (hardware cost)
--
at today's numbers, flat difficulty — network growth extends this; treat as a floor, not a forecast
Live network hashrate and prices, subsidy only, transaction fees excluded (slightly conservative). Excludes cooling; payback assumes flat difficulty. Inputs are saved in your browser. Not financial advice.
Is the Antminer S19j Pro profitable?
The 2021 fleet staple, one of the highest-volume machines of the S19 family: 104 TH/s at 3,068 W (approx. manufacturer spec), 29.5 J/TH. At current difficulty most residential tariffs put it underwater, and this page shows that honestly rather than optimistically.
The only honest answer is a live one: revenue moves with the Bitcoin price and network hashrate every day. At 29.5 J/TH this page’s job is mostly to tell you “no” politely — and to show exactly what electricity price would turn that answer around. The break-even electricity figure is the line — pay less per kWh than that and the machine earns, pay more and it burns.
Specs & physical reality
| Spec | Value |
|---|---|
| Factory bin — 104 TH/s | 104 TH/s · 3,068 W · 29.5 J/TH |
| Input power | 200–240 V dedicated circuit |
| Current draw | ≈13.3 A at 230 V |
| Heat output | ≈10,468 BTU/hr (3,068 W — all of it becomes room heat) |
| Noise | ≈75 dB (manufacturer claim) — server-fan loud, not for living spaces |
| Warranty | 365-day manufacturer term is typical, from ship date — confirm in writing; used units carry none |
| Spec source | Bitmain — approx. manufacturer figures; real units vary by bin, firmware and temperature |
FAQ
- What does the revenue figure include?
- Block subsidy only — 144 blocks/day × 3.125 BTC at the live price, scaled by this rig's share of live network hashrate, after your pool fee and uptime. Transaction fees are excluded, so it is slightly conservative.
- What does the revenue figure exclude?
- Transaction fees, cooling power, and future difficulty growth — the payback figure assumes today's difficulty holds, which historically it does not. Treat payback as a floor.
- Buying an S19j Pro used — what should I check?
- Hashboard health first: ask for a recent full-board hash screenshot and buy only where you can test within a return window — one dead board cuts a third of the hashrate but not a third of the watts. Check fan bearings, look for repair stickers, and remember these units have often run 3+ years in hot aisles: price them as consumables, not assets.
Source: mempool.space (BTC hashrate), CoinGecko (price) — will be cross-checked against BasinTwo's own nodes as they reach tip. Specs are approx. manufacturer figures. Updated every 60s in your browser.